Wednesday, February 15, 2012

Its a raining cold winter day in Southern California, kinda nice for a change. The build continues, I have three coats of epoxy on the roof, waiting for it to cure for a few days then I'll sand it smooth and paint the roof. I've been working on the galley dividers and shelves, it will be a simple design with no doors. I'm thinking about adding a water tank / water heater and 12 volt electric pump but that can wait. Still some work in the cabin and other things to finish off, but I see light at the end of the tunnel. Maybe I'll take it for a test run next week, Hhhhhmmmmmm !
Posted by at No comments:

Sunday, February 5, 2012

     The hatch is done with supports in place and trim on, took about a day to get everything done. Also received my Raka epoxy so I'm in the process of putting the final coats on the roof, after that will be paint and trim. Still waiting on my roof top brackets, but they can be added at anytime, Also picked up some more switches for the galley and disconnect/ connectors for the solar panel wiring from the panels to the controller.
Posted by at No comments:
Subscribe to: Posts (Atom)

Build costs

  • Total to date
  • Roof rack brackets $100.00
  • LED galley lights $60.00
  • Trim, latches and handle for hatch $130.00
  • Paint and epoxy for roof $125.00
  • Wood for cabin cabinets and roof $200.00
  • LED Cabin Lights $60.00
  • Door Hinges $120.00
  • Misc. glue, bolts and varnish $200.00
  • Aluminum door trim $135.00
  • Cabin lights, 15A inlet, 120 vlt outlet box's $110.00
  • 3 - 4 x 8 x 1/4 birch inside walls $90.00
  • 2- 4 x 10 x 1/4 ACX plywood for outside walls $120.00
  • DMV Registration $165.00
  • Electrical, 12 vlt outlets, battery terminals, fuse block, $130.00
  • Galley hinge and door handle assemblies $150.00
  • Framing material for walls $120.00
  • Monroe Retro Shock kit $100.00
  • Bottom flooring ACX 3 sheets of 1/4 in 4 x 8 $60.00
  • 1 Gallon of Raka epoxy $100.00
  • Top flooring Arauco ACX 3-sheets of 1/2 in 4 x 8 $90.00
  • Contura switches and housing units $30.00
  • Pettit underside floor paint. $30.00
  • Primer and undercoating paint for fenders $20.00
  • Stainless sub-frame hardware $40.00
  • Fabrication for Fenders and Mounts $300.00
  • Front and rear jacks $200.00
  • Electrical parts for towing $150.00
  • Frame Fabrication $250.00
  • Sub-floor materials $75.00
  • Rust Bullet Frame Paint $70.00
  • Tow Hooks Qty 4 $40.00
  • Wheel adapters $90.00
  • 2 in ball reciever for 3 in tongue $35.00
  • Leaf Spring Hanger Kit $20.00
  • 2- 4 x 8 x 1/8 luan for profile template $20.00
  • 3500 Axle electric brakes aprox $350.00
  • 15" X 18" Windows $140.00
  • Steel for frame $320.00
  • Build manual $60.00
  • Paddle Door latches $45.00
  • Propane tank and bracket $90.00
  • Benroy & Modernistic Trailer Template $90.00
  • Fantastic Vent 5000RBT $152.00
  • Tires $235.00
  • Used Wheels $150.00