Monday, November 21, 2011

     The hatch has been coated with 3 coats of Raka epoxy on the inside and outside and 3 coats of white Pettit Topside epoxy paint on the outside, the hurricane hinge is on the hatch and I'm fitting my trim pieces for my hatch as well. I also installed a couple of back up lights with a manual switch to turn them on, it's mounted on the underside of the trailer.
Posted by at No comments:

Sunday, November 6, 2011

     The cabin interior is done except for a couple pieces of trim and the rear bulkhead. All the interior lights, switches, 12 and 120 volt outlet and ceiling fan is working. I'm starting on the exterior insulation for the roof and skinning the inside of my galley hatch. I also bought two 40 watt solar panels that I'll be working on, I'm really excited about that and can't wait to get them and start experimenting with them. I'll post some pictures of my latest progress soon.
Posted by at No comments:
Subscribe to: Posts (Atom)

Build costs

  • Total to date
  • Roof rack brackets $100.00
  • LED galley lights $60.00
  • Trim, latches and handle for hatch $130.00
  • Paint and epoxy for roof $125.00
  • Wood for cabin cabinets and roof $200.00
  • LED Cabin Lights $60.00
  • Door Hinges $120.00
  • Misc. glue, bolts and varnish $200.00
  • Aluminum door trim $135.00
  • Cabin lights, 15A inlet, 120 vlt outlet box's $110.00
  • 3 - 4 x 8 x 1/4 birch inside walls $90.00
  • 2- 4 x 10 x 1/4 ACX plywood for outside walls $120.00
  • DMV Registration $165.00
  • Electrical, 12 vlt outlets, battery terminals, fuse block, $130.00
  • Galley hinge and door handle assemblies $150.00
  • Framing material for walls $120.00
  • Monroe Retro Shock kit $100.00
  • Bottom flooring ACX 3 sheets of 1/4 in 4 x 8 $60.00
  • 1 Gallon of Raka epoxy $100.00
  • Top flooring Arauco ACX 3-sheets of 1/2 in 4 x 8 $90.00
  • Contura switches and housing units $30.00
  • Pettit underside floor paint. $30.00
  • Primer and undercoating paint for fenders $20.00
  • Stainless sub-frame hardware $40.00
  • Fabrication for Fenders and Mounts $300.00
  • Front and rear jacks $200.00
  • Electrical parts for towing $150.00
  • Frame Fabrication $250.00
  • Sub-floor materials $75.00
  • Rust Bullet Frame Paint $70.00
  • Tow Hooks Qty 4 $40.00
  • Wheel adapters $90.00
  • 2 in ball reciever for 3 in tongue $35.00
  • Leaf Spring Hanger Kit $20.00
  • 2- 4 x 8 x 1/8 luan for profile template $20.00
  • 3500 Axle electric brakes aprox $350.00
  • 15" X 18" Windows $140.00
  • Steel for frame $320.00
  • Build manual $60.00
  • Paddle Door latches $45.00
  • Propane tank and bracket $90.00
  • Benroy & Modernistic Trailer Template $90.00
  • Fantastic Vent 5000RBT $152.00
  • Tires $235.00
  • Used Wheels $150.00